User Manual

To clean the rifle barrel, always open the barrel in the same way as when loading it.
Use the appropiate caliber cleaning rod, rod tip, patches and bore brush with gun solvent
to clean it. You should NEVER use lubricating oil inside the barrel or breech. It is helpful
if you occasionally apply a small amount of GAMO oil to the barrel pivot, the two
cocking-lever points, and the trigger pivot. You can also clean the outside metal parts
with oil to prevent rusting.
MAKE SURE THAT THE RIFLE IS
UNLOADED AND THE SAFETY IS “ON” BEFORE CLEANING.
NEVER PUT ANY OIL INSIDE THE BARREL OR THE BREECH.
THE RESULTING COMBINATION COULD CAUSE IRREPARABLE DAMAGE
TO YOUR RIFLE AND SERIOUS HARM TO YOU OR OTHER PEOPLE.