User's Manual

GAT LOCK 6010 F
Installation
www.gantner.com HB_GAT-LOCK6010F--US_16 13
3. INSTALLATION
3.1. Conditions of Use
The GAT Lock 6010 F has been developed for use in the leisure sector as a lock
that is mounted into lockers like clothes lockers or valuables lockers. It can be
used in lockers with metallic doors (plate doors) or non-metallic doors. Please
pay attention to the environmental conditions for temperature, humidity etc., and
see chapter "7. Technical Data".
Cleaning the GAT Lock 6010 F with a high-pressure
cleaner is not permitted. Pay attention to the protective type
in the technical data
3.2. Locker Features
The GAT Lock 6010 F is suitable for locker doors made of metal and non-metallic
materials with a door leaf thickness of between 11 mm (0.45 inch) and 22 mm
(0.87 inch).
The width of the locker door, where the GAT Lock 6010 F is mounted on, may
not be lower than a certain value because this could cause problems when
opening and closing the door (streaking of the GAT Lock 6010 F at the body of
the locker). The minimum value for the door width, given in Figure 2.1, is a re-
ference value which depends on the hinges used (see also "2.5. Installation
Instructions").
Figure 2.1 - Minimal door width