User's Manual

GAT LOCK 6010 F
Installation
18 HB_GAT-LOCK6010F--US_16 www.gantner.com
Conversion for left-hand and right-hand doors can be carried out easily by
following the steps below (see also Figure 2.5).
1.) Lift the control mechanism and
electronics with the button or button
shaft out of the base as far as
possible.
Arrangement for right-hand door
2.) Turn the control mechanism and
electronics through 90° in the
corresponding direction.
3.) Replace the control mechanism and
electronics in the base.
4.) Thus the GAT Lock 6010 F has now
been turned and prepared for the
door opening on the other side.
Arrangement for left-hand door