User's Manual

GAT LOCK 6010 F
Installation
www.gantner.com HB_GAT-LOCK6010F--US_16 23
When the GAT Lock 6010 F is mounted on double metallic locker doors it can be
mounted directly onto the door.
Figure 2.10 – Mounting the GAT Lock 6010 F onto a double-walled metal locker door
The GAT Lock 6010 F always has to be mounted parallel
to the locker door!
The following points must be considered:
• The control mechanics and electronics of the GAT Lock 6010 F must rest
completely on the door or the mounting ridge.
• The diameter of the button hole in the door has an influence on the reading
range and therefore it must be large enough to guarantee a secure reading of
the data carriers at the GAT Lock 6010 F (see "2.3. Reading Ranges").
• Furthermore the hole and the button have to be centred. Otherwise the reading
range for reading data carriers at the GAT Lock 6010 F will be decreased.
Figure 2.11 - Adjustment of the drill hole in the door and button of the GAT Lock 6010 F