User's Manual

GAT LOCK 6010 F
Installation
24 HB_GAT-LOCK6010F--US_16 www.gantner.com
3.6. Installation Procedure
The GAT Lock 6010 F must be installed in the following order, while considering
also the previous sections:
1.) Mark drill holes.
2.) Drill hole for button.
3.) If necessary, drill holes for fastening the housing in place and cut threads
(see "2.5. Installation Instructions").
4.) Screw the housing of the GAT Lock 6010 F in place using four fastening
screws (see Figure 2.12).
5.) Stick number label and instruction label on the door (see Figure 2.12).
Don’t use metallic number labels or else the reading range
will be decreased to the same reading range and
restrictions as for metallic doors (see "2.3. Reading
Ranges").
Figure 2.12 – Attachment of the GAT Lock 6010 F