User's Manual

GAT LOCK 6010 F
Operation
32 HB_GAT-LOCK6010F--US_16 www.gantner.com
"Usage until a certain time after midnight" Mode
In “Point of time" mode, a specific time is configured until which the locker can be
used. After locking a locker, the locker must be unlocked again before the defined
time on the following day. The period begins from 12:00 am.
If the period is exceeded, the data carrier can no longer unlock the locker. In this
case, the user must recode their data carrier at a central station, e.g., the GAT
Lock 6800 F with additional license (Part No. 193732).
Example - "Point of time" mode
The time is set to 120 minutes. The locker usage period begins from 12:00 am.
Independent of the time when the locker is locked it can be unlocked until 2:00
am of the next day. If the locker is locked at 1:00 am it can be unlocked until
2:00am of the next day.
For both operating modes, the locker can be locked/unlocked as often as required
during the duration of use period.
For free locker mode, specially coded MIFARE data carriers must be used.
the data carrier must be coded according to GANTNER’s locker coding
specification.