User's Manual

GAT LOCK 6010 F
Operation
36 HB_GAT-LOCK6010F--US_16 www.gantner.com
Deleting (Remove Authorisation) of MIFARE
®
Data Carriers
Only all authorisations can be deleted at once in the GAT Lock 6010 F.
1.) Hold the locker door pressed shut with one hand.
2.) Press the button of the GAT Lock 6010 F as far as it will go using the
programming data carrier and keep it pressed for about 1 second.
 The information on the data carrier will be read.
3.) The GAT Lock 6010 F will change to Programming mode.
 The LED will light up red for appr. 2 seconds after the Programming Data
Carrier is removed. As soon as the LED will start flashing green and red
alternately the lock is ready to delete the data carriers.
4.) Within the next 5 seconds press the button of the lock again with the
Programming Data Carrier.
5.) If the action is successful, the LED will flash red 5 times and the GAT Lock
6010 F then switches off again. Release the locker door.
 All data carriers are now deleted from in GAT Lock 6010 F and therefore
have no longer authorisation to lock and unlock the locker.