User's Manual

GAT LOCK 6010 F
Operation
38 HB_GAT-LOCK6010F--US_16 www.gantner.com
3.) The following situations are possible:
The data carrier…
a) …is the first data carrier read at the locker.
Unique number, expiry date and index of the data carrier are stored in
the lock. The data carrier is able to lock and unlock the locker until the
end of the validity duration.
b) …has the same "valid to" date and index value as stored in the lock:
In this case the unique number of the data carrier will be stored in the
lock (as long as the max. number of 32 data carriers is not exceeded)
and the data carrier is now authorised to lock and unlock the locker like
the already authorised data carriers.
c) …has a higher index value on the data carrier than in the lock:
In this case the new index value and the "valid from" and "valid to" date
on the data carrier will be stored in the lock and the previously authorised
data carriers will be deleted in the lock, i.e. they are no longer authorised
for the lock.
d) …has a newer "valid to" date and the same index than in the lock:
In this case the index value and the "valid from" and "valid to" dates on
the data carrier will be stored in the lock. The previously authorised data
carriers will be deleted in the lock, i.e. they are no longer authorised for
the lock.
Note: b) is possible if the locker is locked or unlocked. c) and d) is only
possible if the locker is unlocked (open).
4.) Release the locker door.
5.) a) Valid MIFARE data carrier: The information on the data carrier will be stored
in the lock. The locker state will be changed, i.e. the locker will be opened, if
it was locked, and will be locked, if it was opened.
b) Invalid MIFARE data carrier: The LED will light up red briefly and the GAT
Lock 6010 F is switched off again without an action being carried out.
The MIFARE data carrier must be kept in front of the button until the
locking resp. unlocking is done. Don’t remove the data carrier too early.
A data carrier with another index value than in the lock can be used for example
to rent an already rented lock again i.e. the next day and to set the other data
carriers in the lock invalid. This means that the deleted data carriers in the lock
are no longer authorised to lock or unlock the locker.