User's Manual

GAT LOCK 6010 F
Operation
40 HB_GAT-LOCK6010F--US_16 www.gantner.com
5.3. Summary of System Data Carriers
For the start-up and maintenance of the battery-operated lock several data
carriers are necessary. These data carriers are shipped together with the GAT
Lock 6010 F in form of RFID cards with corresponding labelling in different
colours.
The available system data carriers are listed below:
- Master data carrier (3 pieces, red)
- Programming data carrier (black)
- Battery data carrier (blue)
- Reset data carrier (green)
- Service data carrier (yellow)
The system data carriers are system-dependent and therefore work only
at the respective system.
5.3.1. Master Data Carrier
A master data carrier is used to open and lock all the locks in a system. If a
MIFARE
®
data carrier should be lost, emergency opening of the corresponding
locker can be carried out using a master data carrier.
Three master data carriers are supplied per system. These are only valid for the
respective system.
If a master data carrier should be lost, a new master data carrier can be ordered
from GANTNER Electronic GmbH. Before the new master data carrier is used,
the "old" master data carrier(s) has (have) to be deleted from GAT Lock 6010 F
first (the number of a master data carrier is stored in the lock the first time the
master data carrier is used). This is carried out using the reset data carrier. The
following procedure has to be followed:
1.) Hold the locker door pressed shut with one hand.
2.) Press the button of the GAT Lock 6010 F using a reset data carrier and keep it
pressed for approx. 1 second.
 The information on the reset data carrier will be read.