User's Manual

GAT LOCK 6010 F
Service and Maintenance
46 HB_GAT-LOCK6010F--US_16 www.gantner.com
6.1.1. Procedure
1.) Unlock the battery compartment using the battery compartment key and
swing the cover open.
2.) Remove the old battery and insert a new one in such a way that the fixing
strip can be heard to snap into place.
The battery has to be inserted with the contacts to the front of the battery
compartment first. Make sure the polarity and position of the battery is
correct (see Figure 5.2 and Figure 5.3).
3.) Close the battery compartment again until it can be heard to click into place.
4.) Press the locker door shut with one hand and hold it pressed.
5.) Press the button for approx. 1 second using a Battery data carrier.
6.) The system will flash green twice briefly. From this moment onwards, the
GAT Lock 6010 F can be used again.
7.) Release the locker door.
Do not dispose batteries with domestic waste!
 Dispose batteries in an eco-friendly way, i.e. through a
municipal battery collecting box.