Installation Instructions
Table Of Contents
- 1 INTRODUCTION
- 2 GENERAL INFORMATION
- 3 INSTALLATION
- 4 COMMISSIONING
- 5 CONFIGURATION
- 6 OPERATION
- 7 CLEANING AND MAINTENANCE
- 8 TECHNICAL DATA
GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Installation
www.gantner.com
HB_GL7p--EN_12
29
3.9 Attaching the Number Plate
On the button of the GL7p, the round number plate (0.8 mm thickness) must be attached. A neutral-white number
plate without printing is included with the GL7p upon delivery (GL7p Button Plate, Part No. 748633). The number
plate can also be ordered with laser numbering. This will be delivered as standard with a 4-digit number (GL7p
Number Plate, Part No. 1103180).
In addition, a button sticker (GL7p Number Sticker) can be attached to the number plate; however, this is not
mandatory. The button sticker is available with pre-printed numbers ranging from 001 to 500. The stickers can be
ordered in sheets with 50 consecutive numbers (for article numbers see "2.6. System Components").
The button sticker can also be ordered with customized printing, e.g., with a logo, color, individual number, or text.
Please contact GANTNER Electronic GmbH for more information.
1. GL7p
3. Number plate
2. Button
4. Button sticker (optional)
Figure 3.10 – Number plate and button sticker on a right-hinged door