Installation Instructions
Table Of Contents
- 1 INTRODUCTION
- 2 GENERAL INFORMATION
- 3 INSTALLATION
- 4 COMMISSIONING
- 5 CONFIGURATION
- 6 OPERATION
- 7 CLEANING AND MAINTENANCE
- 8 TECHNICAL DATA
GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Configuration
www.gantner.com
HB_GL7p--EN_12
41
5.2.4 Updating the GL7p Firmware
GANTNER periodically releases firmware updates for the GL7p. In order to take advantage of the latest features, it
is recommended to update the GL7p to the latest firmware during configuration or at regular intervals.
► Right-click onto the GL7p in the “Devices” tree and select “Update Firmware”.
Figure 5.6 – GAT Config Manager - Updating the GL7p firmware
o The “Device update wizard” opens.
Figure 5.7 – Device update wizard - Device selection
► Select which parts of the GL7p you would like to update:
- Main Device: Firmware for the main GL7p device, which controls all main functions of the lock.
- Reader(s): Firmware for one of the readers installed in the GL7p (RFID reader or wireless reader).
► Click on "Next".
o If "Reader(s)" is selected, an additional window opens in which you must select one of the available
options for an update (if "Main Device" is selected, this window is skipped).