Installation Instructions

GAT NET.Lock 7020 System
www.gantner.com HB_GAT-NETLOCK7020--EN_12 7
The GAT NET.Lock 7020 was developed and fabricated under the quality management standard ISO 9001 and GANTNER
Electronic GmbH is also certified according to standard ISO 14001.
This product is in conformity with the following EC directives, including all applicable amendments:
- 2014/53/EU (Radio Equipment Directive)
The complete text of the CE Declaration of Conformity is available on the following internet link:
https://www.gantner.com/downloads-gat-netlock7020_gz33sib79r
GANTNER is committed to meeting or exceeding the requirements of the RoHS directive (2011/65/EU). The RoHS
directive requires that manufacturers eliminate or minimize the use of lead, mercury, hexavalent chromium,
cadmium, polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electronic equipment sold
in the EU after July 1, 2006.
The WEEE symbol on GANTNER products and their packaging indicates that the corresponding material must not
be disposed of with normal household waste. Instead such marked waste equipment must be disposed of by
handing it over to a designated electronic waste recycling facility. Separating and recycling this waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects
human health and the environment. Please contact your local authority for further details of your nearest electronic
waste recycling facility.
FCC INFORMATION (U.S.A.)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, cause harmful interference to radio communications.
Operation of this equipment in residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
FCC Warning Statement
[Any] changes or modifications not expressly approved by GANTNER Electronic GmbH could void the user's authority to operate
the equipment.
Compliance Information Statements:
GAT NET.Lock 7020 P GAT NET.Controller S 7020 F/ISO
GAT NET.Lock 7020 USB P GAT NET.Controller S 7020 F/ISO light
GAT NET.Controller S 7020 BA GAT NET.Controller S 7020 ICLS
FCC ID: NC4-GEA1190143A
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device must not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: NC4-GEA1190148A
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device must not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: NC4-GEA1190149A
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device must not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: NC4-GEA1190147A
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device must not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.