User Manual

Confidential
Page 1
CBC America Corp. www.computarganz.com
55 Mall Drive Tele: 800-422-6707
Commack, NY 11725
Instruction Manual for Security Height Marker Camera
The Height Marker Camera was designed with ease of installation and high
adjustability in mind. The curved front surface of the unit allows the camera to be
rotated for site specific adjustments. The camera’s 3.7mm IR corrected wide-angle
lens provides a 74° field of view. The camera can be rotated 90° left and right of
center to capture the desired view.
Sized to fit most standard door frames (1.7” width), and cable entry through the top,
bottom, or rear of the unit allows the unit to be installed in a wide variety of
locations. Equip the unit with an additional accessory camera and mount the Height
Marker Camera between two doors to cover multiple exits with a single unit. Or
position the additional accessory camera to view across the entrance to provide a full
profile shot, while the other camera(s) faces in toward the flow of exit traffic.
Height Marker Cameras can be coupled with ceiling-mounted CCTV cameras to
augment businesses’ surveillance capabilities. The ceiling cameras capture the
subject’s height as he or she passes the highly visible height marker, while the
camera inside captures facial images. When height marker tape is installed without
an on-board camera, there is a risk of failing to capture quality facial images of
subjects wearing a hat or hood.
NOTE:
Standard unit is painted white with color coded decals. Additional colors are
available with or without height marker indicators. Please contact your Sales
Representative or the manufacturer for details in matching the right camera
solutions and specifications to the specific application requirements for best system
performance.