User Manual

３２
Monitoring
Using the status bar in the live mode
Selecting a split mode
Click a desired split mode from 1, 4, 9, 16, 6 and 8 split screen. Or press the [DISPLAY]
button on the remote control until a desired split mode is displayed.
 4ch (8ch) NVR model support only 1- and 4-split (8-split) screen modes.
Auto sequence
Click the Sequence button in the status bar, or press the [SEQ] button on the remote contro
l to perform the specified sequence mode.
You can configure the sequence settings in
<SEQUENCE>.
For details, refer to “Sequence”. (page 43)
Controlling PTZ
You can control PTZ cameras connected to each
channel. Use the mouse to click PTZ button on
the status bar, or press the [PTZ] button of the
remote control to initiate the predefined sequence.
In PTZ mode, use buttons on the screen to control PTZ or use [ZOOM], [FOCUS] and
[PRESET] buttons of the remote control.