User Manual

４６
System Setting
User Setting
You can configure the settings regarding user management and user and group permissions.
Management
You can add a user account(s) that can be edited
at a later time.
1. From <SYSTEM SETUP> - <USER>, select
<MANAGEMENT>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to add a user account
or select an item that you want to edit.
3. To apply the change, click <APPLY> in the
bottom of the screen.
4. When done, press the [EXIT] button on the
remote control or click <CLOSE> in the lower screen.
The confirmation message appears and you will return to the previous menu.
To add a user account
1. Click <ADD> in the bottom of the screen.
2. Use the [▲▼◀▶] buttons on the remote control
and move to a desired item.
Then, press [ENTER] to select the item.
> USER ID : enter the user ID using the virtual
keyboard.
> PASSWORD : With the virtual keyboard, enter
the password.
> GROUP : From <ADMIN>, <MANAGER> and
<USER>, select a group that the user belongs to.
> EMAIL : Type in the e-mail address to which you will receive notification of an event if it
occurs.
> EMAIL NOTIFY : Choose whether you will receive notification of an event if it occurs.
> COVERT CHANNEL : You can set the channel to hide from a specific user.
3. When done, click <OK>.
The added user account will be listed.