User Manual

５３
System Setting
System Management
You can check, update or reset the system information.
1. From <SYSTEM SETUP> - <SYSTEM>,
select <SYSTEM MANAGEMENT>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to set each option of
the system management.
FW UPDATE : you can update the current software
with the latest version.
FACTORY DEFAULT : Return the NVR settings to
the factory default.
SYSTEM DATA : Save the system settings or get
the system information from other device.
- SAVE : Store the NVR settings to a storage device.
Connect the storage device to the USB port of NVR.
- LOAD : Apply the settings of the storage device
to the NVR. Connect the storage device to the
USB port of NVR.
PASSWORD : Open or close the dialog box for
settings of the menus: quit, system settings, record
settings, backup, and search.
If it is set to <Off>, note that the ADMIN account
is only effective and access to all menus will be
restricted.
EXPIRED TERM OF PASSWORD : You will be
prompted to change the current password after a
certain period of time.
AUTO LOGOUT : If there is no user input for a
certain period of time, you can set to log out
automatically.
WAIT TIME : Specify the waiting time for Auto
Logout.
PoE POWER LIMIT (HUB) : Sets the nominal
power consumption of the external PoE device’s
power adaptor.
AC POWER FREQUENCY : Set to the actual AC
power's frequency (50Hz / 60Hz) applied to NVR to
avoid flickering.
3. When done, press the [EXIT] button on the remo
te control or click <CLOSE> in the lower screen to
return to the previous menu.