Ganz 16Ch Full HD NVR with External PoE Hub, 6TB : User Manual : Page 55

５５

System Setting

Control Device

Configure the settings of the remote control and

keyboard controller.

1. From <SYSTEM SETUP> - <SYSTEM>,

select <CONTROL DEVICE>.

2. Use the [▲▼◀▶/ENTER] buttons on the

remote control or use the mouse to set the

connection options for the control device.

>SYSTEM ID : Set the ID of the NVR so that

the keyboard controller can identify.

>PROTOCOL : Set up the protocol of the

keyboard controller.

>BAUD RATE : Specify the RS485 communication speed.

>REMOTE CONTROLLER ID : Set the ID of the remote control.

3. To apply the change, click <APPLY> in the bottom of the screen.

4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the

lower screen. The confirmation message appears and you will return to the previous menu.

Security

For security, you can set to apply reinforced password policy (to system, search/backup)

and control accessing audio and snapshot.

1. From <SYSTEM SETUP> - <SYSTEM>,

select <SECURITY>

2. Use the [▲▼◀▶/ENTER] buttons on the remote

control or use the mouse to set each option of

security

>AUDIO SUPPORT: Allows audio function

If set to <OFF>, all audio functions are disabled.

Live and playback screen do not produce audio,

and no audio recording is allowed.

Note that changing the setting from <OFF> to <ON> initializes audio related settings.

Hence, reconfiguration is required after enabling.

>SNAPSHOT SUPPORT: Allows snapshoto function

If set to <OFF>, all capturing functions are disabled. User cannot take a snapshot on the

live screen, playback screen and backup player screen.

Event notification with e-mail will not include event snapshot too.

Note that changing the setting from <OFF> to <ON> initializes snapshot related settings.

Hence, reconfiguration is required after enabling.

>ENHANCED PASSWORD RULE: Sets whether to apply strong password policy, which

prevents using too easy password.

>PASSWORD CHECK WHEN SEARCH/BACKUP: Sets whether to ask password when

attempted search/backup. Set to <ON> to ask password when accessing backup menu.

Using <EXPORT> on the timeline will ask password too.

3. When done, press the [EXIT] button on the remote or <CLOSE> in the lower screen to

return to the previous menu.