Instruction Manual

᧯᧯
System Setting
Audio Setup
You can configure the settings of the voice and audio signal.
AUDIO
Choose whether to receive the live sound source
and select an audio channel.
1. From <SYSTEM SETUP> - <AUDIO>, select
<AUDIO>.
2. Use the [ʆʈُٙ/ENTER] buttons on the remote
control or use the mouse to select an item that
youwant to edit.
>DEFAULT LIVE AUDIO CHANNEL : select an
Audio channel to monitor on the live screen.
>NETWORK AUDIO TRANSMISSION : decide if
NVR transfers the audio signal to the remote client.
>RECEIVE NETWORK AUDIO : decide if NVR receives the audio signal from the remote client.
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower
screen. The confirmation message appears and you will return to the previous menu.
Buzzer output
You can set to output the buzzer if you manipulate
the remote control.
1. From <SYSTEM SETUP> - <AUDIO>, select
<BUZZER>.
2. Use the [ʆʈُٙ/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
> REMOTE CONTROL : specify the output of a beep
when you press a button on the remote control.
3. To apply the change, click <APPLY> in the bottom
ofthe screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen.
The confirmation message appears and you will return to the previous menu.
