Instruction Manual

᧱᧮
Record Setting
You can configure the record settings for the NVR. Only authorized users can access the Record
Setup menu.
To start the Record Setup menu
How to use the mouse
How to use the remote control 1
Record Setup
Operation Mode
You can set the recording options for Auto or Manual mode.
1. From <RECORD SETUP> menu, select <OPERATION MODE>.
2. Use the [ʆʈُٙ] buttons or use the mouse to set <RECORD SETUP MODE> to
<AUTO CONFIGURATION> or<MANUAL CONFIGURATION>.
3. Set the recording options for each selected Record mode.
4. To apply the change, click <APPLY> in the bottom of the screen.
5. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower
screen. The confirmation message appears and you will return to the previous menu.
.