Instruction Manual

᧳
OVERVIEW
Rear Panel
NO Name Description
1 CAM1~CAM8 Ethernet ports used for connecting the network camera video and
power.
2 WAN(UPLINK) Network port for connection to the Internet, router or hub
3 AUDIO IN Microphone connection port.
4 ALARM OUT Alarm output device connection port.
5 RS-485 Communications port for connecting peripherals such as system
keyboard.
6 Power Switch NVR power switch.Plug the power cord and turn this switch on.
7 DC 12V NVR power input port Connect to a 12V adaptor.
8 RS-232C
Signal connection port for POS and ATM.Scheduled to be
upgraded.
9 ALARM IN Alarm input signal port.
10 AUDIO OUT Port for speaker connection.
11 eSATA Connection port for external SATA storage.
12 HD MONITOR Port for connecting a full HD(1920x1080) supported monitor.
Use the HDMI cable to connect with a 1080p 60Hz monitor.
13 LAN(DOWNLINK) Port for connecting the dedicated network device. (Do not share with
other device.)
14 DC 48V Power input port for the camera (PoE compliant).
Connect to a 48V adaptor.