Instruction Manual

᧳᧲
Web Viewer
Setup
Click <SETUP> to display the remote control screen for the NVR.
When done, click <OK> to apply the changes to the remotely connected NVR.
9 If the NVR is in process of system or record setting, the remote control will be disabled.
If you change the settings remotely at will, the major 'Record Settings' of the NVR may be changed, which
is not recommended at all.
Search Viewer at a Glance
Camera
To name the camera title
You can name the camera title that is displayed on
each channel screen. Select a channel to name and
provide a new title. Then, click <OK> to apply it.
9 You can enter up to 9 alphanumeric
characters for the camera title.
Image Setting
You can set the image of each channel.
When done, click <OK> to apply the changes.
9 The default color value is <50>.
(Brightness, Contrast, Tint, Color)
9 If you change the default settings, the
video from the NVR or the video color
may not be displayed properly.
Covert Setting
You can set to hide the video of a specific camera
from a specific user. Set to hide the camera video
so that a specific user or user group can not view.
To change the covert settings from user group to
user, move to the <USER> menu and make
necessary changes.
When done, click <OK> to apply the changes.
