SC101 3 Axis Joystick PTZ Controller Please read the instructions carefully and keep this manual for future reference.
TABLE OF CONTENTS • CHAPTER 1 INTRODUCTION In This Manual…………………………………………………07 Features………………………………………………………..07 Before installation……………………………………………..07 Hardware Overview…………………………………………...08 System Configuration and Wiring……………………………10 • CHAPTER 2 SYSTEM INSTALLATION & TYPICAL APPLICATIONS System Installation…………………………………………….11 PTZ SETUP…………………………………………………….11 MAIN SETUP…………………………………………………..12 JOYSTICK CALIBRATION…………………………………...13 EASY SETTING FUNCTION (E.S.F)……………………….
LIMITATION OF LIABILITY THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY CONSEQUENCES RESULTING FROM THE USE THERE OF. THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO IN CORPORATE SUCH CHANGES.
LIMITATION OF LIABILITY TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT CAUTION.
IMPORTANT SAFEGUARDS 1. READ AND RETAIN INSTRUCTIONS Read the instruction manual before operating the equipment. Retain the manual for future reference. 2. CLEANING Turn the unit off and unplug from the power outlet before cleaning. Use a damp cloth for cleaning. Do not use harsh cleansers or aerosol cleaners. 3. ATTACHMENTS Do not use attachments unless recommended by manufactured as they may affect the functionality of the unit and result in the risk of fire, electric shock or injur y. 4.
FCC COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMECIAL ENVIRONMENT.
CHAPTER 1. INTRODUCTION In This Manual Overview - This manual covers the operation of the WTX-1200A keyboard. SC101 Keyboard This remote keyboard is an accessory for PTZ dome camera, etc It allows the user to control from 1 to 255 cameras. Features - Controls from 1 ~ 255 cameras. - Multiple protocol supported in each channel (WDS,WCY, CYN, WSL, Pelco). - RS 485/RS-422 communication (Tx : 3 port , Trx :1 port). - Programmable user preferences. (preset, tour, group, etc.).
CHAPTER 1. INTRODUCTION Hardware Overview Hardware Components - This remote keyboard contains easy to use control keys on the front and simple input and output connectors on the back Control Buttons & Connection - The unit provides the primary operator interface. Most operations are one or two button presses. The following Table contains a description for each buttons on the keyboard and port of cable connection. Use Figure 1 and Figure 2 as a reference.
CHAPTER 1. INTRODUCTION Control buttons (continued) Number Button Description Camera Focus control 6 Camera Zoom control *Before the mouse function use, you mouse be usb driver installed (http://www.goodome.com/beta/english/e_download.php (filename:cdm20.
CHAPTER 1. INTRODUCTION System Configuration and Wiring Basic Installation - Use the Keyboard Configuration when only one keyboard is connected to the controlled units.
CHAPTER 2. SYSTEM INSTALLATION & TYPICAL APPLICATIONS System Installation Keyboard Installation - Before you start connecting the keyboard equipment to your system, make sure the units to be controlled are completely installed and everything is working correctly. Before use of this keyboard, you should set the protocol and baud rate (2.4~57.6kbps) in the PTZ SETUP mode. Use the following steps to set the communication protocol and baud rate.
CHAPTER 2. SYSTEM INSTALLATION & TYPICAL APPLICATIONS MAIN SETUP MAIN SETUP - Main Setup mode, select 2+ . (2~3 seconds) setup screen allows you to change each device setting. Note: The baud rate must be the same between the controlled unit and the keyboard.
CHAPTER 2.
CHAPTER 2. SYSTEM INSTALLATION & TYPICAL APPLICATIONS EASY SETTING FUNCTION (E.S.F) MAIN SETUP - Main Setup mode, select 2+ . (2~3 seconds) setup screen allows you to change each device setting. Note: The baud rate must be the same between the controlled unit and the keyboard.
CHAPTER 2. SYSTEM INSTALLATION & TYPICAL APPLICATIONS EASY SETTING FUNCTION (E.S.F) EASY SETTINF FUNCTION (Number key + Function key) Number key + PSET/TOUR/PATT/SCAN/ E.S.
MEMO NY: 55 Mall Drive Commack, NY 11725 • TEL: 1 (800) 422-6707 • (631) 864-9700 • FAX: (631) 543-5426 CA: 20521 Earl Street Torrance, CA 90503 • TEL: 1 (800) 888-0131 • (310) 793-1500 • FAX: (310) 793-1506 www.computarganz.com © 2010 CBC (AMERICA) Corp. All Rights Reserved.