User Manual

PixelPro User’s Manual
ZN-D2MAP/ZN-D1MAP/ZN-D1A Ver1.00
Installation Mode allows use of the analog BNC output from the camera to connect the camera
to a service monitor, in order to adjust the positioning of the camera and focus the lens.
ON : Analog Output is enabled; both IP video streams are set to VGA (640 x 480) resolution.
OFF : Analog Output will be disabled.
NOTE: You must turn Installation Mode OFF to utilize the Megapixel features of the camera.
5. Video Codec and Camera image
The following descriptions show examples of some of the features available with GANZ PixelPro.
5.1 Video Codec
This section allows you to choose the compression codec for each of the video streams.
Motion JPEG
This format uses standard JPEG still images in the video stream. These images then are displayed
and updated at a rate sufficient to create a stream that shows constantly updated motion.
The Motion JPEG stream uses considerable amounts of bandwidth, but also provides excellent
image quality and access to every individual image contained in the stream.
Multiple clients accessing Motion JPEG streams could use different image settings.