User Manual

PixelPro User’s Manual
ZN-D2MAP/ZN-D1MAP/ZN-D1A Ver1.00
1.
Network connector
The GANZ PixelPro connects to the network via a standard network cable, and automatically
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket
could also be used to power the GANZ PixelPro via Power over Ethernet (PoE). The camera
auto-senses the correct power level when using a PoE switch, router or injector.
2. Power Connector
12VDC or 24VAC power connector
3. I/O terminal Block
3.1 Audio in
Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal)
3.2 Audio out
The Audio output (line level), which could be connected to a line output of a microphone system
or an active speaker with a built-in amplifier.
3.3. Alarm in
One analog (dry contact) alarm input
3.4. Alarm out
One relay output (
2A : AC120V / DC60V)