User Manual

PixelPro User’s Manual
ZN-D2MAP/ZN-D1MAP/ZN-D1A Ver1.00
2.3 Adjusting the Camera Direction
The camera body is set in a 3-axis gimbals mount, allowing movement in the pan, tilt and
rotational planes. Adjust the direction of the lens so that it faces the subject.
Caution: DO NOT hold lens for adjustment
2.4 Adjusting the Image and Focus
To adjust the position of the lens:
ZN-D1A (Normal Lens)
1. Open the Live View page in your web browser.
- Select the Setup tab, and open the Installation page.
- Set ‘Installation Mode’ to ‘ON’ and select the ‘Video Format'
2. Connect supplied video monitor cable to video output connector, then connect it to analog
monitor with coaxial cable.
- Unscrew the zoom puller on the lens by turning it counter-clockwise.
- Adjust the zoom setting and re-tighten the zoom puller.
- Unscrew the focus puller on the lens to adjust the focus, and re-tighten the focus puller.
3. Check the image from the Live View page on your web browser.
- Set ‘Installation Mode’ to ‘OFF’ to resume normal camera operation.