Instructions

Instruction manual
for the remote controlled socket and transmitter
Type: EMW202TD + EMW202R1
Function
1. The remote-controlled socket switches the connected lighting and devices with a wireless
transmitter on and off, on radio basis within a range of up to 25 meters.
2. The product is ideal for lighting control, home automation and energy saving.
3. The receiver has an indicator light for the power condition.
Operation
1. There is no program setting required, the frequency is preset.
2. The transmitter controls the countdown function for 30 minutes, 60 minutes, 2 hours and 4
hours, as well as the ON / OFF function.
3. Connect the remote-controlled socket to the power supply.
4. Turn off the power to the consumer before connecting to the remote-controlled power outlet.
5. After connecting to the remote-controlled socket, the connected device must be switched on
again.
6. Remove the plastic cover on the battery compartment of the transmitter.
7. Push the “ ”, “ ” buttons on the transmitter to turn the connected devices on and off
with the remote control.
8. The countdown function automatically switches off the connected load after the selected time
has elapsed (30 minutes, 60 minutes, 2 hours or 4 hours).
9. The indicator light on the receiver flashes once when the signal for on / off is received.
10. When the indicator light on the transmitter goes dark, the battery needs to be replaced. Open
the battery compartment and replace the battery with an equivalent one
Warning
1. Always turn off your device before connecting.
2. For use in dry indoor areas only.
3. The devices connected to the remote control outlet should not exceed the specifications listed
below.
4. The socket must be easily accessible.
5. The household product safety standard does not allow remote control of all products. The remote
control must not be used to control products that could be at risk. For example, Curling iron, fryer,
heater, heating pad or hair dryer.
6. Voltage-free only with pulled plug.
7. Do not stick in a row.