User manual

ManualsBrandsGAO ManualsTimersFlush mount timer/power strip digital 7 day mode 1800 W IP20 Count-down mode, Progammable, RND mode, Powe

Instruction manual for wall-in digital timer

Item nr: EFP700ET

A. Function

1. 20 programs per day, 15 configurations of weekly settings

2. Countdown period, 1min. to 99hrs and 59 minutes

3. Random function

4. ON/OFF mode and clock mode changing

5. Daylight Saving Time

6. It is ideal for energy saving and home security purposes, it is also a great choice for

smart home

B. LCD display and input buttons’ function

Buttons

Functions

Press to reset

Manual ON/OFF button, change the current power status

Also can clear and resume the setting during programming

PROG

Press to program setting/browse

RND

Press to set Random function

Press to set countdown OFF

ON/OFF mode and clock mode change

Adjust button, press for setting of Daylight Saving time

Adjust button

Clock setting

C．Operation Procedure

1) Clock setting

Summary of content (7 pages)

PAGE 1
Instruction manual for wall-in digital timer Item nr: EFP700ET A. Function 1. 20 programs per day, 15 configurations of weekly settings 2. Countdown period, 1min. to 99hrs and 59 minutes 3. Random function 4. ON/OFF mode and clock mode changing 5. Daylight Saving Time 6. It is ideal for energy saving and home security purposes, it is also a great choice for smart home B.
PAGE 2
1. Press to set the clock. Day on LCD flashes. 2. Press + or – to set the day. Press ‘ 3. Press + or – to set hour. Press ‘ ’ to confirm. Hours on LCD flashes. ’ to confirm. Minute display will now flash. 4. Press + or – to select the minute. Press ‘ ’ to confirm and exit current clock setting mode. 2) Program setting In clock mode, when the ‘PROG’ button is pressed, the timer enters the timer setting mode, which can provide up to 20 ON/OFF settings per day.
PAGE 3
NOTE:  If, while programming, there is no activity (pressing buttons) for over 10 seconds, timer will automatically exit the setting mode. Or you can choose to press to exit the setting.  To accelerate selection, press and hold the + or – button.  When in ‘PROG’ mode, other settings will be disabled.
PAGE 4
. To pause countdown, press ‘CD’, and the logo stops flashing until you press CD again to continue countdown. NOTE: 1. Countdown: from 1minute minimum and 99hrs and 59minutes maximum. 2. When in ‘CD’ mode, other settings will be disabled.。 3. When Countdown is finished, shows OFF. You can Press logo will disappear on the LCD screen, Power status button (or any 4 small buttons at the corner) to finish the countdown manually and back to clock mode.
PAGE 5
 In clock mode, press “+” button to turn on or off the Daylight Saving time mode  LCD will shows icon at screen if DST activated. 7) RESET When the timer is malfunctioned, or need to completely remove the original settings, press and hold the R button to the factory default mode shows as below: E. Specifications 1. Power Rating :230V~, 50Hz, 8A, 2. Resistive load: 1800W max. 3. Timer setting interval: 1 minutes 4. Battery: LR44, 1.5VDC, 2pcs, F. Cautions 1.
PAGE 6
H. Disassembling Clutch the frame and Pull out I. Assembling Put operation panel and the frame together; Aim the pin to the hole of the module then press in J. Battery changing Change the new battery here, be aware of polarity Correct disposal of the products Within the European Union, this symbol indicates that the products must not be disposed in the household waste.
PAGE 7
and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling. G. Discarding batteries is an environmentally conscious manner and should be in accordance with applicable regulations. 1) Please insert the batteries correctly according to the polarity (+ and -) connected to the Battery and the device being characterized.