User manual

1. Press to set the clock. Day on LCD flashes.
2. Press + or – to set the day. Press ‘ ’ to confirm. Hours on LCD flashes.
3. Press + or – to set hour. Press ‘ ’ to confirm. Minute display will now flash.
4. Press + or – to select the minute. Press ‘ ’ to confirm and exit current clock setting
mode.
2) Program setting
In clock mode, when the ‘PROG’ button is pressed, the timer enters the timer setting mode,
which can provide up to 20 ON/OFF settings per day. The ON/OFF settings can be programmed
at your choice of 15 different weekly setting as listed here:
1. MO TU WE TH FR SA SU 9. MO WE FR
2. MO (Only) 10. TU TH SA
3. TU (Only) 11. SA SU
4. WE (Only) 12. MO TU WE
5. TH (Only) 13. TH FR SA
6. FR (Only) 14. MO TU WE TH FR
7. SA (Only) 15. MO TU WE TH FR SA
8. SU (Only)
Programming procedure：
PROGRAM 1 ON:
When PROG is pressed, ‘1 ON’ will flash, then it comes to following operations
a. DAYS OF WEEK –Press ‘PROG’ button. The LCD will flash the week day(s) selection
options as noted above. Press + or – to select your choice of week days – or
individual day.
b. HOUR - Press ‘PROG’ again. The LCD will now flash the hour. Press + or – to
select the hours. It is 24 hrs display.
c. MINUTE – Press ‘PROG’. The LCD will now flash the minute. Press + or – to set
the minute. You have now chosen your first program ON time.
Repeat the above procedure to set the PROGRAM 1 OFF and other programs.