User manual

NOTE:
 If, while programming, there is no activity (pressing buttons) for over 10 seconds,
timer will automatically exit the setting mode. Or you can choose to press to
exit the setting.
 To accelerate selection, press and hold the + or – button.
 When in ‘PROG’ mode, other settings will be disabled.
 During setting, you can use any one of the 4 small buttons at the corner to
clear/resume your current program setting
 If the timer running under your timer setting, a ‘ ’ logo will appear on the
LCD screen
3) Random setting
1. In clock mode, press ‘RND’ button to activate the random function. The ‘ ’ logo will
appear on the LCD screen. Your timer is now set for a random ON/OFF.
2. This function allows for a random ON and OFF during 18:00PM to 6:00AM the next day.
The OFF period will be 26-42 minutes.; and ON period will be 10-26minutes randomly
NOTE:
 When in ‘ ’ mode, other settings will be disabled.
 It repeats daily.
4) Countdown Setting
1. In clock mode, Press ‘CD’ button to set countdown, minute will be flashing on the LCD
screen. Press the + or – button to increase or decrease your countdown timer selection.
2. Press ‘CD’ button again, hour will be flashing on the LCD. Press the + or – button to
increase or decrease your countdown timer selection.
3. Press ‘CD’ button again to exit the countdown setting and start countdown function. The
logo will be flashing on the LCD screen. Your device will go off after time is counted
down and the logo will disappear.