User manual

4. To pause countdown, press ‘CD’, and the logo stops flashing until you press CD
again to continue countdown.
NOTE:
1. Countdown: from 1minute minimum and 99hrs and 59minutes maximum.
2. When in ‘CD’ mode, other settings will be disabled.。
3. When Countdown is finished, logo will disappear on the LCD screen, Power status
shows OFF. You can Press button (or any 4 small buttons at the corner) to finish
the countdown manually and back to clock mode.
5) ON/OFF mode and function mode change
Press button to change the manual ON/OFF mode and clock mode. Product is
default set by clock mode.
Press button once, timer changes to manual ON/OFF mode, ON or OFF will be
appeared on the LCD according to the current status, no clock shows. Press button
(or any 4 small buttons at the corner) to switch ON/OFF manually ONLY. Press
again, it will return to clock mode. If you want to change to Timer mode, press “PROG “. If
you want Random mode, press “RND” to activate.
Clock mode Timer mode
Random mode Countdown mode
Above pictures shows the different function modes
Above pictures：LCD display in manual ON/OFF mode.
6) Daylight Saving Time (DST) setting