Data Sheet

GAPTEC-Electronic GmbH & Co. KG
[e-mail] – www.gaptec-electronic.com
Page 1 of 4
1S4A_1.5UP – Rev. 2017-1.4
Specifications subject to change without notice.
1S4A_1.5UP Series
1W - Single Output - Fixed Input - Isolated & Unregulated
MINIATURE SIP PACKAGE
Efficiency up to 80%
Miniature SIP package
Single Output Voltage
1500VDC Isolation
Temperature Range:
-40°C~+105°C
Industry Standard Pinout
Short circuit protection (SCP)
RoHS Compliance
No External Component
Required
PCB Mounting
DC-DC Converter 1 Watt
The 1S4A_1.5UP series are specially designed for applications where an isolated
voltage is required in a distributed power supply system.
These products apply to:
1) Where the voltage of the input power supply is stable
(voltage variation: ±10%Vin);
2) Where isolation between input and output is necessary
(isolation voltage ≤1500VDC);
3) Where the output voltage regulation and the ripple & noise of the output
voltage is not strictly required.
Typical application: digit circuit condition; normal low-frequency artificial circuit
condition; relay drive circuit and data switching circuit condition, etc.
Common specifications
Short circuit protection*: 1S4A_24xxS1.5U/1S4A_0524S1.5U: 1s
Others: Continuous, automatic recovery
Temperature rise at full load: 25°C TYP (Ta=25°C)
Cooling: Free air convection
Operation temperature range: -40°C – +105°C
Storage temperature range: -55°C – +125°C
Lead temperature 300°C MAX, 1.5mm from case for 10 sec
Storage humidity range: < 95%
Case material: Plastic [UL94-V0]
MTBF: >3,500,000 hours
Weight: 1.3g
* Supply voltage must be discontinued at the end of short circuit duration for
models 1S4A_24xxS1.5U and 1S4A_0524S1.5U.
Isolation specifications
Item Test condition Min Typ Max Units
Isolation voltage Input-Output, tested
for 1 minute and
leakage current less
than 1mA
1500 VDC
Isolation resistance Input-Output, test at
500VDC
1000 MΩ
Isolation capacitance Input/Output,
100KHz/0.1V
20 pF
Model selection:
WCTP**_xxyyN##O
W= Watt; C= Case; T= Type; P= Pinning; **= Voltage Variation
(omitted ± 10%); xx= Vin; yy= Vout; N= Numbers of Output;
##= Isolation (kVDC); O= output regulation
Example:
1S4A_0505S1.5UP
1= 1 Watt; S4= SIP4; A= Pinning; 5Vin; 5Vout; S =Single Output;
1.5= 1,5KVDC; U= Unregulated Output; P= Short Circuit Protection (SCP)
Output specifications
Item Test condition Min Typ Max Units
Output voltage
accuracy
See tolerance envelope curve
Line regulation For Vin change of ±1%
• 3.3VDC output
• Others
±1.5
±1.2
%
%
Load regulation 10% to 100% load
• 3.3VDC output
• 5VDC output
• 9VDC output
• 12VDC output
• 15VDC output
• 24VDC output
18
12
8
7
6
5
%
%
%
%
%
%
Temperature
coefficient
100% full load ±0.03 %/°C
Ripple & Noise* 20MHz Bandwidth 60 150 mVp-p
Switching frequency Full load, nominal input 100 KHz
*Test ripple and noise by “parallel cable” method. See detailed operation instruc-
tions at DC-DC application notes.
EMC specifications
EMI CE CISPR22/EN55022
CLASS B (External Circuit Refer to
EMC recommended circuit)
EMI RE CISPR22/EN55022
CLASS B (External Circuit Refer to
EMC recommended circuit)
EMS ESD IEC/EN61000-4-2 Contact ±8KV
perf. Criteria B
Input specifications
Item Test condition Min Typ Max Units
Input current voltage
(1sec. max.)
• 3.3VDC input
• 5VDC input
• 12VDC input
• 15VDC input
• 24VDC input
404/30
277/20
115/15
83/10
57/17
-/70
-/60
+/50
-/35
-/30
mA
mA
mA
mA
mA
Reflected ripple
current
15 mA
Input surge voltage
(1sec. max.)
• 3.3VDC input
• 5VDC input
• 12VDC input
• 15VDC input
• 24VDC input
-0.7
-0.7
-0.7
-0.7
-0.7
5
9
18
21
30
VDC
VDC
VDC
VDC
VDC
Input filter Filter capacitor
Hot plug Unavailable