Data Sheet

GAPTEC-Electronic GmbH & Co. KG
[e-mail] – www.gaptec-electronic.com
Page 3 of 6
LEDW10_24 – Rev. 2016-1.0
Specifications subject to change without notice.
LEDW10_24 Series
Constant current power LED driver - Wide Input - Isolated & Regulated
Recommended AC input circuit
Components Specifications
C1 X1 Safety capacitor,
0.1µF /300VAC (QIYA)
C2 100µF /63V Electrolytic
capacitor (CapXon)
D1, D2, D3,
D4
Rectifier diode
1N4007 1A/1000V
D0-41(PANJIT)
LEDW10_24-xxx
Typical application circuits
If it is necessary to protect LED in actual application, you could connect a
PTC to the input of every channel or all channels, as shown in
Recommended AC input circuit.
Note: The negative output terminal can’t connect GND, or the module
may be damaged.
EMC solution-recommended circuit
Components Specifications
Tvs SMC51A,1500W (Bringtking)
L1 CD53-82µH（(CEAIYA)（
C1 470µF/100V (CapXon)
C2 225K/50V 1210 X7R
(TORCH)
C3 104K/50V 0805 X7R
(TORCH)
C4 105K/50V 1210 X7R
(TORCH)
C5 102K/2000V 1210 (TDK)
(choose)
C6 470pF/100V 0805 (TORCH)
R1 680Ω 0805 (can be
replaced by inductance or
magnetic bead)
LEDW10_24-xxx
LEDW10_24-xxx
LEDW10_24-xxx