Data Sheet

GAPTEC-Electronic GmbH & Co. KG
[e-mail] – www.gaptec-electronic.com
Page 1 of 4
5ACM_S3 – Rev. 2015-1.0
Specifications subject to change without notice.
5ACM_S3 Series
5W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Wide input voltage range:
85~264VAC/100~400VDC
Over current protection
Short circuit protection (SCP)
High efficiency
High safety isolation 3000VAC
Ultra-slim SIP package
Industrial grade
Meets IEC60950/EN60950/
UL60950
UL60950, EN60950 approval
AC-DC Converter 5 Watt
The 5ACM_S3 series is a high efficiency green power modules provided by
GAPTEC. The features of this series are: Accept either AC or DC
input, wide input voltage, high efficiency, low power consumption, safety
isolation etc. All models are particularly suitable for the applications such
as industrial, electric power, instrumentation, smart home which do not
have high requirement on EMC. EMC application circuit must be added if
the products need to be applied to EMC harsh environment.
(pending)
Model selection:
WTC_yyN##
W= Watt; T= Type; C= Case; yy= Vout; N= Numbers of Output;
##= Isolation (kVAC)
Example:
5ACM_05S3
5= 5Watt; AC= AC-DC; M= case style; 5Vout; S= Single Output;
3= 3kVAC
Note:
1. Module required dispensing fixed after assembled;
2. This part is open frame, at least 6.4mm safety distance between the the primary
and secondary external components of the module is needed to meet the safety
requirement;
3. All specifications were measured at Ta=25°C, humidity<75%, nominal input
voltage and rated output load unless otherwise specified;
4. All index testing methods in this datasheet are based on our Company’s
corporate standards;
5. The performance indexes of the product models listed in this manual are as
above, but some indexes of non-standard model products will exceed the above-
mentioned requirements, and please directly contact our technician for specific
information;
6. We can provide product customization service;
7. Specifications of this product are subject to changes without prior notice.
Output specifications
Item Test condition Min Typ Max Units
Output voltage
accuracy
• 3.3V output
• Others
±2
±1
±3
±2
%
%
Line regulation Full load ±0.1 ±0.5 %
Load regulation 5% to 100% load ±1 ±1.5 %
Temperature drift 100% full load ±0.02 %/°C
Ripple & Noise* 20MHz Bandwidth
(peak-peak value)
50 150 mV
Stand-by Power 0.5 W
Over-current
Protection
≥110%Io self-recovery
Over-voltage
Protection
Zener clamp diode
Min. load 0 %
Switching frequency Full load, nominal input 60 KHz
Hold-up time • 115VAC input
• 230VAC input
20
80
ms
ms
* Test ripple and noise by “parallel cable” method. See application notes for
detailed operation instructions.
Input specifications
Item Test condition Min Typ Max Units
Input voltage range • Conventional
• AC Input
• DC Input
100
85
100
140
264
400
VAC
VAC
VDC
Input frequency 47 63 Hz
Input current • 115VAC
• 230VAC
0.2
0.1
A
A
Inrush current • 115VAC
• 230VAC
5
10
A
A
Leakage current CY0 is 1nF/400VAC 0.25 mA
Common specifications
Short circuit protection: Continuous, automatic recovery
Temperature rise at full load: 25°C TYP
Cooling: Free air convection
Operation temperature range: -25°C – +85°C
Storage temperature range: -40°C – +105°C
Welding temperature: Wave-soldering: 260±5°C; time:5~10s
Manual-welding: 360±10°C; time:3~5s
Storage humidity range: < 85%
Power derating: -25°C ~ 0°C: 0.8%/°C MIN
55°C ~ 85°C: 1.33%/°C MIN
Safety standard: IEC60950/EN60950/UL60950
Safety-regulated certification: EN60950/UL60950
Safety class: Class II
Hot plug: Unavailable
Case material: Plastic [UL94-V0]
MTBF (MIL-HDBK-217F@25°C): >300,000 hours
Weight: 7g
Isolation specifications
Item Test condition Min Typ Max Units
Isolation voltage Input-Output, tested for
1 minute
3000 VAC