Data Sheet

GAPTEC-Electronic GmbH & Co. KG
[e-mail] – www.gaptec-electronic.com
Page 3 of 4
5ACM_S3 – Rev. 2015-1.0
Specifications subject to change without notice.
5W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated
5ACM_S3 Series
Typical application circuit
EMC solution-recommended circuit
Model C1
(required)
C2
(required)
R1 C3 CX1 CY0 NTC MOV Fuse
(required)
TVS
5ACM_03S3 10µF/400V 220µF/35V 12Ω/2W 100µF/50V 0.1µF/275VAC 1nF/400VAC 13D-5 14D561K 1A/250V SMBJ7.0A
5ACM_05S3 10µF/400V 220µF/35V 12Ω/2W 100µF/50V 0.1µF/275VAC 1nF/400VAC 13D-5 14D561K 1A/250V SMBJ7.0A
5ACM_09S3 10µF/400V 220µF/35V 12Ω/2W 100µF/50V 0.1µF/275VAC 1nF/400VAC 13D-5 14D561K 1A/250V SMBJ12A
5ACM_12S3 10µF/400V 150µF/35V 12Ω/2W 100µF/50V 0.1µF/275VAC 1nF/400VAC 13D-5 14D561K 1A/250V SMBJ20A
5ACM_15S3 10µF/400V 150µF/35V 12Ω/2W 100µF/50V 0.1µF/275VAC 1nF/400VAC 13D-5 14D561K 1A/250V SMBJ20A
5ACM_24S3 10µF/400V 150µF/35V 12Ω/2W 100µF/50V 0.1µF/275VAC 1nF/400VAC 13D-5 14D561K 1A/250V SMBJ30A
Note:
1. C1: When AC input, C1 is used as filter capacitor, the value of C1 is
recommended to be 10µF /400V.
When DC input, C1 is used as EMC filter capacitor, the value of C1 is
recommended to be 10µF/400V(when the input voltage is above 370VDC,
the recommended value of C1 is 10µF/450V).
2. Output filtering capacitor C2 is electrolytic capacitor, C2 is recommended to
apply electrolytic capacitor with high frequency and low resistance. For
capacitance and current of capacitor please refer to manufacture’s datasheet.
Capacitance withstand voltage derating should be 80% or above. C3 is ceramic
capacitor, which is used to filter high-frequency noise.
5ACM_12S3 - DC input
5ACM_S3 - DC input
5ACM_024S3
5ACM_12S3
5ACM_05S3
200VDC
300VDC
400VDC