Data Sheet

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

Page 2 of 4

5ACA_4 – Rev. 2016-1.3

Speciﬁcations subject to change without notice.

5ACA_4 Series

5W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated

Common speciﬁcations

Operating temperature range -25°C ~ +70°C

Power derating temperature range • 55°C ~ 70°C: 2%/°C

• -25°C ~ 0°C: 2%/°C

Storage temperature range -25°C ~ +105°C

Case temperature range +95°C MAX

Humidity 95% MAX

Temperature coefﬁcient 0.02%/°C

Switching frequency 140kHz MAX

I/O-isolation voltage 4000VAC/1Min

EMC / EMI / CE CISPR11/EN55011, CLASS A (without external circuit)

CLASS B (with typical applications Figure 5)

EMC / EMI / RE CISPR11/EN55011, CLASS A (without external circuit)

CLASS B (with typical applications Figure 5)

EMC / EMI / ESD IEC/EN 61000-4-2 Contact ±6KV / Air ±8KV perf. Criteria B

EMC / EMI / RS IEC/EN 61000-4-3 10V/m perf. Criteria A

EMC / EMI / EFT • IEC/EN 61000-4-4 ± 2kV (without external circuit) perf. Criteria B

• IEC/EN 61000-4-4 ± 4kV (with typical applications Figure 5) perf. Criteria B

EMC / EMI / Surge • IEC/EN 61000-4-5 ±1KV/±2KV (without external circuit) perf. Criteria B

• IEC/EN 61000-4-5 ±2KV/±4KV (with typical applications Figure 5) perf. Criteria B

EMC / EMI / CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A

EMC / EMI / PFM IEC/EN61000-4-8 10A/m perf. Criteria A

EMC / EMI / Voltage dips, short and

interruptions immunity

IEC/EN61000-4-11 0%-70% perf. Criteria B

Safety standards IEC60950/EN60950/UL60950

Safety certiﬁcation EN60950/UL60950 (Pending)

Safety class CLASS II

Case material UL94V-0

Install PCB mounting, Chassis mounting with Screw Terminals

MTBF >300,000h @25°C

Weight • 35g (PCB mounting)

• 85g (Chassis mounting with Screw Terminals)

Typical characteristics

Note:

1. When input 85~110VAC/240~264VAC/100~140VDC/340~370VDC, it need to be voltage derated on basis of temperature derating;

2.②This product is suitable for use in natural air cooling environments, if in a closed environment, please contact our company’s FAE.