Data Sheet

GAPTEC-Electronic GmbH & Co. KG
[e-mail] – www.gaptec-electronic.com
Page 1 of 4
1ACA_3 – Rev. 2016-1.2
Specifications subject to change without notice.
1ACA_3 Series
1W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Wide input voltage range:
85~305VAC/120~430VDC
AC and DC dual-use (input
from the same terminal)
Small size
Low ripple and noise
EMC meets EN55022,
EN55024
Low standby power
High efficiency up to 75%
Over output current protection
Short circuit protection (SCP)
Meet IEC61000, UL60950
and IEC60950 standards
3 years warranty
AC-DC Converter 1 Watt
The 1ACA_3 series is the compact size power converters series offered
by Gaptec. It features compact size and 3000VAC safer isolation. It of-
fers good EMC performance, meets IEC61000, UL60950 and IEC60950
standards, and is widely used in industrial, electricity, instruments and
civil applications.
If it is planned to be used in electricity and other higher requirement to
EMC applications, one must connect a typical application.
Output specifications
Output voltage accuracy ±5% (max)
±6% (max) at 3.3V output
Line regulation (full load) ±2% (typ)
Load regulation (10% to 100%) ±5% (typ)
Ripple & Noise* (p-p) 20MHz Bandwidth:
100mV (typ), 200mV (max)
Temperature coefficient ±0.04%/°C (typ)
Stand-by power consumption 0.2W (max)
Short circuit protection Continuous, and auto resume
Over current protection 110%~400% IO can auto resume
Hold-up time 230VAC output:
50ms (typ)
* Ripple and Noise are measured by the method of parallel lines, please see AC-DC
Converter Application Notes for specific operation methods.
Input specifications
Input voltage range 85~305VAC, 120~430VDC
Input frequency 47~63Hz
Input current 110VAC
• 37mA (max)
230VAC
• 21mA (max)
Inrush current 110VAC
• 7A (typ)
230VAC
• 14A (typ)
Leakage current 0.15mA (max)
Recommended eExternal
input fuse (special package
series include fuse)
1A/300V
Hot plug Unavailable
Model selection:
WTC_yyN##
W= Watt; T= Type; C= Case; yy= Vout; N= Numbers of Output;
##= Isolation (kVAC)
Example:
1ACA_05S3
1= 1Watt; AC= AC-DC; A= case style; 5Vout; S= Single Output;
3= 3kVAC
(pending)
Approval Model Package Power
[W]
Output
[Vo]
Output
[lo]
Ripple and Noise
[mV, typ]
Efficiency
[%, typ]
Capacitive load
[µF, max]
UL/CE 1ACA_03S3 33.7x22.2x18mm 1 3.3V 300mA 100 63 4000
UL/CE 1ACA_05S3 33.7x22.2x18mm 1 5V 200mA 100 68 4000
UL/CE 1ACA_09S3 33.7x22.2x18mm 1 9V 111mA 100 72 2200
UL/CE 1ACA_12S3 33.7x22.2x18mm 1 12V 83mA 100 73 2200
UL/CE 1ACA_15S3 33.7x22.2x18mm 1 15V 67mA 100 74 1000
UL/CE 1ACA_24S3 33.7x22.2x18mm 1 24V 42mA 100 75 680
Note:
1. Models listed with strike-through text have been officially discontinued.
2. Unless otherwise specified, all specifications are measured at rated input voltage
and rated output load, TA=25°C, humidity < 75%.
3. All specifications stated in this datasheet are subject to the above listed models
only. For specifications of non-standard models, please contact our technical
support team.