Instructions / Assembly

If you have any questions, or you’re missing parts,
call our customer care department: 1-800-297-8662
Rev. 1
2
3. Install face plate corners first (3a), then install the face plates
to shelf brackets using flat head screws (3b).
5. Install shelf supports. First align shelf support with tab located on under-
side of shelf bracket (3a). Insert end of shelf support into tab (3b). rotate shelf
support so it is flat against wall (3c). Mark the hole location, remove shelf
support and drill pilot hole with a 3/16” drill bit. Secure shelf support to wall
using washers and lag bolts (3d).
4. Snap shelf rods into shelf bracket grooves.
3a
3b
3b
3a
3a
3b
3c
3d
FACE
PLATE
FACE PLATE
CORNER
SHELF
BRACKET
SHELF
SUPPORT
END OF
SHELF SUPPORT
SHELF
SUPPORT
SHELF ROD