BY V-BRO PRODUCTS RESIDENTIAL MOTORIZED PLATFORM LIFT SYSTEM Model: 4125P INSTALLATION AND OPERATING INSTRUCTIONS Distributed Exclusively by V-BRO PRODUCTS www.GarageGator.com For technical questions and replacement parts, please call 1-888-GATOR-08 Save this manual for future reference.
TABLE OF CONTENTS SECTION Garage Gator Motorized Storage Unit PAGE Safety Information......................................................................................................................................3 Tools Needed.............................................................................................................................................4 Carton Inventory....................................................................................................................
SAFETY INFORMATION Garage Gator Motorized Storage Unit When you see the safety symbol on the following pages this will alert you of the possibility of serious injuries or death if you do not comply with the corresponding instructions. The hazard may come from something mechanical or for the electrical shock. Read the instructions carefully! To reduce the risk of severe injury or death: 1. READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS.
Tools Needed Garage Gator Motorized Storage Unit Power drill with 1/2” wood drill bit Step ladder Pliers Safety glasses Ratchet and 1/2” socket 1/2” socket Adjustable, open ended wrench Phillips screwdriver Tape Measure Pencil Stud Finder (optional) 4
CARTON INVENTORY Garage Gator Motorized Storage Unit Carefully inspect your new motorized storage unit for any possible damage and/or shortage of parts. Separate all major components and parts as detailed below and on the next page. Do not attempt installation if parts are damaged or missing. If parts of your 4125P are missing or appear damaged call V-Bro customer service at 1-888-GATOR-08, Monday - Friday, 8:00 AM to 5:00 PM Eastern Time.
PARTS (K) 3” lag bolt x6 (T) hand control switch holder hook x1 (U) 3/4” hole saw drill bit x1 (P) 1/4” x 1/2” bolt x1 (N) 5/16” nut x4 (shipped attached to part A) (Q) 6mm nut x1 (S) 2” wood screws x2 (R) power cord cable clamps x2 (V) paper motor mounting plate template x1 Drawings & photos for illustrative purposes only - actual parts may vary from those pictures.
INSTALLATION INSTRUCTIONS Garage Gator Motorized Storage Unit Step 1 Determine motor mounting plate location on the ceiling • Choose a location in your garage where you would like to install your Garage Gator model 4125P - an unobstructed operating space of at least 3 feet by 4 feet is required. The motor mounting plate (A) should be installed at least 3 feet away from walls or any other obstructions.
Step 2 - Install the motor mounting plate to the ceiling • Position the paper motor mounting template (V) in the installation area and mark with a pencil the four locations where the wood screws will be fastened. • It is very important that the wood screws are fastened to the center of the joists. Use the hole saw drill bit (U) or cut away the drywall with a utility knife to obtain an unobstructed view of the width of the joists so the exact center can easily be determined (covered ceilings only).
Step 3 Attach the motor hoist to the motor mounting plate. • Identify your installation option by referring to the illustrations on page 7. Determine how the motor hoist should be rotated - which direction the spacer channel bar attachment tab should be pointing. Ensure your motor hoist is rotated properly before placing the motor hoist on the motor mounting plate.
Step 4 Connect and install the spacer channel and spacer pulley bars • Insert the flared end of a spacer channel bar onto the fixed bolt coming down from the motor plate tab above the cable spools on the motor hoist. Attach a 6mm washer (L) and a 6mm nut (Q) to the fixed bolt and tighten with the adjustable wrench until the spacer channel bar is securely fastened to the motor hoist. (SEE FIG.
Step 5 Install the cable over the channel bar pulley • Plug in the motor hoist (B) to the nearest 120 volt power outlet. • Use the hand control switch and safely lower the cables until 9 feet of cable is visible. • Unplug the power cord from the outlet. • Temporarily remove the pulley at the end of the spacer channel pulley bar (D) (use pliers to remove the cotter pin then remove the clevis pin to release the pulley) (SEE FIG.
Step 6 Install the hand control switch hook • Secure the hand control switch holder hook (T) to a convenient location on the closest appropriate wall by removing the protective paper from the adhesive strip then adhere the hook to the wall by applying pressure with your fingers. (SEE FIG. 10) Step 7 Plug in the unit • Plug in the motor hoist (B) to the nearest 120 volt power outlet.
PLATFORM ASSEMBLY INSTRUCTIONS Garage Gator Platform B - corner angle x4 end angle iron x2 side angle iron x2 E - bolt, nut and washer x20 metal slats x2 F - platform cable x2 Layout (A) in a square shape so that each end meets. Attach (A) together by bolting on (B) to corners, using (E). Insert each slat (D) into square, approx 2” apart and bolt together using (E). Attach (F), by attaching big hook end to cable and split small hook ends to each corner on each side.
OPERATING INSTRUCTIONS Garage Gator Motorized Storage Unit TO RAISE OR LOWER THE PLATFORM: v Do not stand under the lift. v Turn the key in the hand control switch to the “ON” position. v Press and hold the rocker switch in the direction you want the platform to travel. v Release the switch when the desired location is reached. TO LOAD THE PLATFORM: v v v v Lower the platform to a comfortable height. Evenly distribute the weight of articles stored.
CONTACT INFORMATION Garage Gator Motorized Storage Unit V-Bro Products is on call. Installation and service information as well as ordering repair parts is as near as your telephone Monday - Friday 8:00 AM to 5:00 PM Eastern Time (subject to holidays). Contact us toll free. V-Bro Products 28114 County Road 561 Tavares, Florida 32778 Phone: 1-888-428-6708 email:info@garagegator.com MAINTENANCE 1-888-GATOR-08 Garage Gator Motorized Storage Unit 1.
What is covered: Any defect in material and workmanship from personal, normal household use in accordance with the Owner’s Manual. For how long: Garage Gator Model 125. One year from date of purchase. Who Gets the Warranty: The warranty is limited to the consumer who originally purchased the product. Geographic Scope: This warranty applies only to the Residential otorized Platform ift System purchased in the United States and Canada.
