BY V-BRO PRODUCTS RESIDENTIAL MOTORIZED PLATFORM LIFT SYSTEM Model: GG 22 INSTALLATION AND OPERATING INSTRUCTIONS Distributed Exclusively by V-BRO PRODUCTS www.GarageGator.com For technical questions and replacement parts, please call 1-888-GATOR-08 Save this manual for future reference.
TABLE OF CONTENTS SECTION Garage Gator Motorized Storage Unit PAGE Safety Information......................................................................................................................................3 Tools Needed.............................................................................................................................................4 Carton Inventory....................................................................................................................
SAFETY INFORMATION Garage Gator Motorized Storage Unit When you see the safety symbol on the following pages this will alert you of the possibility of serious injuries or death if you do not comply with the corresponding instructions. The hazard may come from something mechanical or for the electrical shock. Read the instructions carefully! To reduce the risk of severe injury or death: 1. READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS.
Tools Needed Garage Gator Motorized Storage Unit Power drill with 1/2” wood drill bit Step ladder Pliers Safety glasses Ratchet and 1/2” socket 1/2” socket Adjustable, open ended wrench Phillips screwdriver Tape Measure Pencil Stud Finder (optional) 4
CARTON INVENTORY Garage Gator Motorized Storage Unit Carefully inspect your new motorized storage unit for any possible damage and/or shortage of parts. Separate all major components and parts as detailed below and on the next page. Do not attempt installation if parts are damaged or missing. If parts of your GG 22 are missing or appear damaged call V-Bro customer service at 1-888-GATOR-08, Monday - Friday, 8:00 AM to 5:00 PM Eastern Time.
PARTS (K) 3” lag bolt x6 (T) hand control switch holder hook x1 (U) 3/4” hole saw drill bit x1 (P) 1/4” x 1/2” bolt x1 (N) 5/16” nut x4 (shipped attached to part A) (Q) 6mm nut x1 (S) 2” wood screws x2 (R) power cord cable clamps x2 (V) paper motor mounting plate template x1 Drawings & photos for illustrative purposes only - actual parts may vary from those pictures.
INSTALLATION INSTRUCTIONS Garage Gator Motorized Storage Unit Step 1 Determine motor mounting plate location on the ceiling • Choose a location in your garage where you would like to install your Garage Gator model GG 22 - an unobstructed operating space of at least 3 feet by 4 feet is required. The motor mounting plate (A) should be installed at least 3 feet away from walls or any other obstructions.
Step 2 - Install the motor mounting plate to the ceiling • Position the paper motor mounting template (V) in the installation area and mark with a pencil the four locations where the wood screws will be fastened. • It is very important that the wood screws are fastened to the center of the joists. Use the hole saw drill bit (U) or cut away the drywall with a utility knife to obtain an unobstructed view of the width of the joists so the exact center can easily be determined (covered ceilings only).
Step 3 Attach the motor hoist to the motor mounting plate. • Identify your installation option by referring to the illustrations on page 7. Determine how the motor hoist should be rotated - which direction the spacer channel bar attachment tab should be pointing. Ensure your motor hoist is rotated properly before placing the motor hoist on the motor mounting plate.
Step 4 Connect and install the spacer channel and spacer pulley bars motor plate tab above the cable spools on the motor hoist. Attach a 6mm washer (L) and channel bar is securely fastened to the motor hoist. (SEE FIG. 4) • Line up the hole in the end opposite the pulley of the spacer channel pulley bar (D) over the hole in the spacer channel bar (C). Thread a 1/4” x 1/2” bolt (P) into the hole and tighten with a ratchet or adjustable wrench until the spacer channel pulley bar is securely fastened.
Step 5 Install the cable over the channel bar pulley • Plug in the motor hoist (B) to the nearest 120 volt power outlet. • Use the hand control switch and safely lower the cables until 9 feet of cable is visible. • Unplug the power cord from the outlet. • Temporarily remove the pulley at the end of the spacer channel pulley bar (D) (use pliers to remove the cotter pin then remove the clevis pin to release the pulley) (SEE FIG.
Step 6 Install the hand control switch hook • Secure the hand control switch holder hook (T) to a convenient location on the closest appropriate wall by removing the protective paper from the adhesive strip then adhere the hook to the wall by (SEE FIG. 10) Step 7 Plug in the unit • Plug in the motor hoist (B) to the nearest 120 volt power outlet. You may wish to use the power cord cable clamps (R) and the 2” wood screws (S) to secure the power cord or extension cord (not provided) to the ceiling or wall.
PLATFORM ASSEMBLY INSTRUCTIONS Garage Gator Platform Side 2 le ro x For oles x 2 2 x olts ts as er Set x iddle o e tio olt t as er Set x E e olts x F- Gridded Platform Slats x 2 E - platform cable x2 Ste Atta a li e t e oles of t e latforms a olt to et er from t e mi le si t e olts alo it t e t a as ers ro i e Item Ste Atta ea a le iro o tsi e of t e latform e e li i mi le se tio as ee se re olts ts a as ers Item a le Iro s to t e t e oles o e t e si t e Ste Atta t e Eye olts Eye olts item D
OPERATING INSTRUCTIONS Garage Gator Motorized Storage Unit TO RAISE OR LOWER THE PLATFORM: v Do not stand under the lift. v Turn the key in the hand control switch to the “ON” position. v Press and hold the rocker switch in the direction you want the platform to travel. v Release the switch when the desired location is reached. TO LOAD THE PLATFORM: v Lower the platform to a comfortable height. v Evenly distribute the weight of articles stored.
CONTACT INFORMATION Garage Gator Motorized Storage Unit V-Bro Products is on call. Installation and service information as well as ordering repair parts is as near as your telephone Monday - Friday 8:00 AM to 5:00 PM Eastern Time (subject to holidays). Contact us toll free. V-Bro Products 28114 County Road 561 Tavares, Florida 32778 888- 2 email:info@garagegator.com MAINTENANCE 1-888-GATOR-08 Garage Gator Motorized Storage Unit 1. Check to be sure the motor is properly attached to its mounting plate.
What is covered: Any defect in material and workmanship from personal, normal household use in accordance with the Owner’s Manual. For how long: Garage Gator Model 22 . One year from date of purchase. Who Gets the Warranty: The warranty is limited to the consumer who originally purchased the product. Geographic Scope: This warranty applies only to the Residential purchased in the United States and Canada.
