Installation Guide

TOOLS YOU WILL NEED

CHECK BOX FOR THESE CONTENTS

P L E A S E R E A D C O M P L E T E L Y B E F O R E Y O U B E G I N A S S E M B L Y

Pyramid Trellis

A S S E M B L Y I N S T R U C T I O N S

PREL I M INARIES

Phillips screwdriver (electric driver recom-

If you have purchased a color stained trellis please disregard this

note.

If you have purchased a natural wood unstained trellis you may

wish to stain or paint it to achieve a desired look and increased

resistance to nature’s elements. We recommend that you do this

before assembly for best results. Follow manufacturer’s instruc-

tions when applying stain or when painting and allow sufficient

time for trellis pieces to dry prior to assem-

A NOTE CONCERNING OUR UNSTAINED TRELLIS

WORK AREA

A clean, flat work surface (floor, sidewalk, driveway or bench

top) is preferred for Step 1.

PLEASE NOTE: While screw holes are pre-drilled through the

panel faces, there are no pilot holes in edges or cap piece into

which the screws are to be driven. This is because the wood ac-

cepts screws very easily and we want to ensure that each screw

gets maximum “bite”. Be sure to hold both pieces of wood

firmly in position when starting each screw. Make sure you are

driving them in straight, particularly into the panel edges.

Solid Cap Piece (1)

Triangular Trellis Panels (4)

HARDWARE

Wood screws (28)

445.35.41 12/10

Win FREE Arboria Products

Give us feedback about this Arboria product and be entered into a drawing to

win more Arboria goods. It’s easy, go to www.Arboria.com to find the product

you purchased, then click on the link to review. Be sure to enter your email and

telephone so that we may contact you if you win. Share a photograph of your

product in use for an extra chance to win.

Visit www.Arboria.com for official sweepstakes rules.

PAGE 1
8 ASSEMBLY INSTRUCTIONS Pyramid Trellis PLEASE READ COMPLETELY BEFORE YOU BEGIN ASSEMBLY Win FREE Arboria Products Give us feedback about this Arboria product and be entered into a drawing to win more Arboria goods. It’s easy, go to www.Arboria.com to find the product you purchased, then click on the link to review. Be sure to enter your email and telephone so that we may contact you if you win. Share a photograph of your product in use for an extra chance to win. Visit www.Arboria.
PAGE 2
Page 2 S T E P 1 : A T T AC H I NG T H E F IR S T S ID E T O T H E P Y R A M I D C A P Place the solid pyramid cap on its side on your work surface. Place the “point” of one triangular trellis panel on top of the connector stub at the base of the pyramid, with the cross-members on the underside of the trellis panel (facing down). Line up the right edge of the right-hand side of the trellis piece so that it is exactly flush with the right side of the connector stub (see Diagram 1).
PAGE 3
Page 3 S T E P 2 : AT T AC H I NG T H E S E C O N D S I D E P A N E L Stand the first frame, with pyramid cap attached, onto its base. Place a second frame, with cross-members inward, on its left. Leaning the two tops together, let the upper end of the second panel rest against the connector stub. You will see that they can now stand unsupported (see Diagram 2).
PAGE 4
LWO Corporation 3841 N. Columbia Blvd.