Installation Guide

Hardware Used

3/16” Screw

Base fixer

x 5

ASSEMBLY INSTRUCTIONS

Hardware Used

1. Line up holes on the bracket of wheel assembly (G) with the

corresponding holes on base (H), then insert M8 x 16 mm bolts

(BB) through holes. Hand tighten with M8 flange nuts (AA). Be

sure the wheel assembly is parallel to the base.

To protect heater from strong wind, anchor the base securely to

the ground with screws.

a. Reverse the base, fix the ground fixer (PP) to the base with

bolts (DD) and washers (EE) like picture shows.

b. Secure the ground fixer with nuts (QQ).

c. Fix another two ground fixer with bolts and nuts, and reverse

the base.

2. Fix the base fixer (NN) to the base with screws (CC) like

picture shows.

WARNING

This product contain sharp edges on

the panels,cylinder housing and

handle please install with care.

x 2

x 6 x 6 x 6

M8 Flange nut

BB PP

EE QQ

Bolt M8 x 16

x 2 x 3

Bolt M6 X 10

Ground Fixer

Small flat

washer Φ6

M6 Nut

Lowes.com