D GB Æ Návod k obsluze Elektrická řetězová pila SK Návod na používanie Elektrická reťazová píla GR Oδηγíες χρήσεως Ηλεκτρικό αλυσοπρίονο RUS Инструкция по эксплуатации Электрическая цепная пила SLO Navodila za uporabo Električna verižna žaga HR Uputstva za upotrebu Električna lančana pila UA Інструкція з експлуатації Електрична ручна ланцюгова пилка RO Instrucţiuni de utilizare Ferăstrău electric cu lanţ TR Kullanma Talimatı Elektrikli Testere BG Инструкция за експлоатация Електрическа моторна резачка EST
D WICHTIGE INFORMATION Bitte vor dem Benutzen des Gerätes durchlesen und gut aufbewahren DÔLEŽITÉ INFORMÁCIE SK Pred použitím si prečítajte nasledovné informácie a odložte si ich pre budúcu potrebu IMPORTANT INFORMATION GB Read before use and retain for future reference F RENSEIGNEMENTS IMPORTANTS A lire avant usage et à conserver pour référence ultérieure ΣΗΜΑΝΤΙΚΕΣ ΠΛΗΡΟΦΟΡΙΕΣ GR ∆ιαβάστε αυτό το φυλλάδιο πριν από τη χρήση της συσκευής και φυλάξτε το για µελλοντική αναφορά ВАЖНАЯ ИНФОРМАЦИЯ RUS
A 9 8 17 7 16 10 15 11 6 14 12 2 29 18 13 22 3 4 A EN D AR G 1 31 Æ 32 5 19 28 27 24 23 25 26 20 21 9 30 8 10 6 11 2 12 7 29 13 5 1 3 4
B C 1 1 b b 2 c c a a 3a 3b 4a 4b 2 12 5 3 14 6a 6b 7a 7b
D 1a 1b 2a 2b 3 4 5a 5b 6a 6b 7a 7b
E G 2 1 1 2 3mm = 3 4a 1 2 F 4b 5 7 6 8
G 10 11 9 12 13 A B 600 300 - 350 0.
H 1 2 3 4
H 5 6 7 9 8 A 2 C 3 B C C B B 10 A C B
A.
B. SAFETY PRECAUTIONS MEANING OF SYMBOLS 10 m Warning! Correct direction of the cutting teeth. Read the instruction manual carefully Always grip the machine with two hands Protective boots Kickback danger Protective goggles or visor, protective helmet and hearing protection Do not expose to rain or moisture.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 5.
Causes and operator prevention of kickback: Kickback may occur when the nose or tip of the guide bar touches an object (Fig B3), or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.
Electrical safety 1. It is recommended that you use a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it. 2. Before use, examine cable for damage, replace it if there are signs of damage or ageing. 8.
D. ASSEMBLY / DISASSEMBLY BAR AND CHAIN ASSEMBLY Take great care when assembling to ensure this is performed correctly. Remove the plug from the power supply before working on the product. 1a & 1b. Check that the chain brake is not activated. If so, deactivate it. 2a & 2b. Unscrew the chain tensioning knob and rotate in an anti-clockwise direction to remove the drive sprocket cover. Wear Gloves. 3 Position the chain over the bar, starting at the nose sprocket, fitting it into the guide bar groove.
G. MAINTENANCE AND STORAGE Before performing any maintenance or cleaning, remove the plug from the mains. ATTENTION! In cases where work environments are particularly dirty or dusty, the operations described must be performed more frequently than mentioned in the instructions.
Cutting action pushing the chain (from bottom to top) (fig.3) will lead to the danger of a sudden movement of the machine in the direction of the user, with the risk of hitting the user, or an impact of the “kickback danger zone” on the trunk resulting in strong kickback; extreme care must be taken when cutting in this manner. The safest method for using the machine, is to block the log on a sawhorse, cutting from top to bottom, on the portion outside the sawhorse. (fig.4) Spiked bumper use.
ENVIRONMENTAL INFORMATION This section contains information useful for maintaining the characteristic of ecocompatibility included in the origin design of the machine, and as regards proper use and disposal of chain oil USE OF THE MACHINE The operations of filling the oil tank should be carried out in such a way as to avoid spilling oil and contaminating the soil and the environment. DISPOSAL Do not dispose of the machine inappropriately when it is no longer usable.
EU Certificate of Conformity The undersigned GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40, D-89079 Ulm, hereby certifies that, when leaving our factory, the units indicated below are in accordance with the harmonised EU guidelines, EU standards of safety and product specific standards. This certificate becomes void if the units are modified without our approval. Description of Unit......................Electric Chainsaw Type(s) ......................................
Deutschland / Germany GARDENA Manufacturing GmbH Central Service Hans-Lorenser-Straße 40 D-89079 Ulm Produktfragen: (+49) 731 490-123 Reparaturen: (+49) 731 490-290 service@gardena.com Argentina Husqvarna Argentina S.A. Vera 745 (C1414AOO) Buenos Aires Phone: (+54) 11 4858-5000 diego.poggi@ar.husqvarna.com Australia Husqvarna Australia Pty. Ltd. 8 Park Drive Dandenong UIC 3175 Austria / Österreich GARDENA Österreich Ges.m.b.H. Stettnerweg 11-15 2100 Korneuburg Tel.