Operating instructions
EU Declaration of Conformity
ENGLISH - 10
The undersigned Husqvarna AB, S-561 82, Huskvarna, Sweden, hereby certifies that, when leaving our factory,
the units indicated below are in accordance with the harmonised EU guidelines, EU standards of safety and
product specific standards. This declaration becomes void if the units are modified without our approval.
Description of Unit......................Chainsaw
Type(s) ......................................CST3018, CST3518 - CS = Chainsaw
Year of CE Marking.................... 2009
EU Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
Harmonised EN:
EN60745-1, EN60745-2-13, EN50366, EN55014-1, EN61000-3-2, EN61000-3-11
Notified Body that carried out the EC type-examination............... MEEI Kft., 1007
Váci út 48/a-b
1132 Budapest
Hungary
Certificate no. ............................................................................... M3 69240048
Ulm 15/02/2013
Peter Lameli
Global R & D Director - Hand Held
Keeper of technical documentation
1) Working area related emission characteristic level L
pA
according to EN60745-2-13 given in the table.
Vibrations value a
h
according to EN60745-2-13 given in the table.
The declared vibration total value has been measured in accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending
on the ways in which the tool is used
Operators should identify safety measures to protect themselves that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in addition to the trigger time).
2) The Noise Level L
WA
values according to 2000/14/EC are given in the table.
Conformity Assessment Procedure............ Annex V
EN 61000-3-11 Compliance statement
Depending on the characteristics of the local electricity supply network, use of this product may result in short
voltage drops at the instant of switching on. This may influence other electrical equipment e.g a momentary
dimming of a lamp. If the Mains impedance Zmax of your electricity supply is less than the value shown in the
table (applicable to your model) then these effects will not occur. The value of the network impedance may be
determined by contacting your electricity supply authority.
Type CST3018 CST3518
Art. No. 8864 8860
Dry Weight (kg) 5.4 5.5
Power (kW) 1.8 1.8
Oil tank volume (cm
3
) 180 180
Chain pitch (inches) 3/8 3/8
Chain gauge (mm) 1.3 1.3
Maximum length of guide bar (mm) 300 350
Measured Sound Power L
WA
2)
(dB(A)) 106 106
Guaranteed Sound Power L
WA
2)
(dB(A)) 108 108
Sound pressure L
pA
1)
(dB(A)) 95 95
Uncertainty K
pA
(dB(A)) 2.5 2.5
Hand / arm vibration a
h
1)
(m/s
2
) 3.4 3.4
Uncertainty K
ah
(m/s
2
) 1.5 1.5
Mains-Impedance Z
max (
Ω)
0.382 0.382
Cutting Speed (m/s)
10 10