Operation Manual

English - 14
PRESENTATION
The STOP button on the top of the robotic lawnmower
is mainly used to stop the robotic lawnmower when it’s
running. When the STOP button is pressed a hatch
opens, behind which there is a control panel. The STOP
button remains pressed in until the hatch is closed again.
This together with the START button acts as a start
inhibitor.
The control panel on the top of the robotic lawnmower is
where you manage all the robotic lawnmower settings.
When the main switch is set to 1 for the rst time,
a start-up sequence begins which includes a number
of important basic settings. See 3.8 First start-up and
calibration on page 32.
Movement pattern
The movement pattern of the robotic lawnmower is
random and is determined by the robotic lawnmower
itself. A movement pattern is never repeated. With this
cutting system the lawn is mown very evenly without any
mowing lines from the robotic lawnmower.
Search method
The robotic lawnmower operates irregularly until it
reaches the guide wire. Then the robotic lawnmower
follows the guide wire to the charging station.
The guide wire is a wire that is laid from the charging
station towards, for instance, a remote part of the working
area or through a narrow passage to be then connected
with the boundary loop. See 3.6 Installation of the guide
wire on page 28.
3018-202
3018-239
3023-012
3023-013
1157808,Gardena_R100Li-R130Li,GB_151217.indd 14 2016-01-12 09:15:59