Operation Manual
English - 17
INSTALLATION
The charging station must be positioned with a great deal
of free space in front of it (at least 3 metres). It should
also be centrally placed in the working area to make it
easier for the robotic lawnmower to reach all areas in the
working area.
Do not put the charging station in conned spaces in the
working area. This can make it difcult for the robotic
mower to nd the charging station.
he charging station must be positioned on relatively level
ground. The front end of the charging station must be a
maximum of 5 cm higher or lower than the back end.
The charging station must not be positioned in a way that
can bend its base plate.
The charging station should not be placed on an island as
this limits the laying of the guide wire in an optimal way. If
the charging station has to be installed on an island, the
guide wire also has to be connected to the island. See the
illustration. Read more about islands in the 3.4 Installation
of the boundary wire chapter.
Max 5 cm
Max 5 cm
3012-1312
3012-1053
3023-003
3018-238
3023-004
1157808,Gardena_R100Li-R130Li,GB_151217.indd 17 2016-01-12 09:16:03