Operation Manual

English - 1
1 Introduction and safety 3
1.1 Introduction 3
1.2 Symbols on the product 4
1.3 Symbols in the Operator’s Manual 6
1.4 Safety instructions 6
2 Presentation 10
2.1 What is what? 11
2.2 Package content 12
2.3 Function 12
3 Installation 15
3.1 Preparations 15
3.2 Installation of the charging station 16
3.3 Charging the battery 20
3.4 Installation of the boundary wire 21
3.5 Connecting the boundary wire 27
3.6 Installation of the guide wire 28
3.7 Checking the installation 31
3.8 First start-up and calibration 32
3.9 Test docking with the charging station 32
4 Use 34
4.1 Charging a at battery 34
4.2 Using the timer 35
4.3 Standby 36
4.4 Starting 37
4.5 Stopping 37
4.6 Switching off 37
4.7 Adjusting the cutting height 38
5 Control panel 39
5.1 Operation selection Start 40
5.2 Operation selection Parking 41
5.3 Main switch 41
6 Menu functions 42
6.1 Main menu 42
6.2 Menu structure 43
6.3 Timer 44
6.4 Security 47
6.5 SensorControl 48
6.6 Smart System 49
6.7 Installation 51
6.8 Settings 56
7 Garden examples 58
8 Maintenance 63
8.1 Winter storage 63
8.2 After winter storage 64
8.3 Cleaning 64
8.4 Transport and moving 66
8.5 In the event of a thunderstorm 66
8.6 Blades 66
8.7 Software update 67
8.8 Battery 68
9 Troubleshooting 69
9.1 Fault messages 69
9.2 Info messages 72
9.3 Indicator lamp in the charging station 73
9.4 Symptoms 73
9.5 Finding breaks in the loop wire 75
10 Technical Data 78
11 Guarantee terms 79
12 Environmental information 80
13 EC Declaration of Conformity 81
1157808,Gardena_R100Li-R130Li,GB_151217.indd 1 2016-01-12 09:15:32