Operation Manual

English - 19
INSTALLATION
Do not, under any circumstances, mount the power supply
at a height where there is a risk it can be submerged in
water (at least 30 cm from the ground). It is not permitted
to place the power supply on the ground.
Never connect the power supply to a outlet if plug or cord
is damaged. Damaged or entangled cord increase the risk
of electric shock.
IMPORTANT INFORMATION
Use the power supply’s plug to disconnect
the charging station, for instance before
cleaning or repairing the loop wire.
Installing and connecting the charging sta-
tion
1. Position the charging station in a suitable spot.
2. Tilt the protective cover on the charging station
forward and connect the low voltage cable to the
charging station.
3. Connect the power supply’s power cable to a 100-
240 V wall socket.
4. Attach the charging station to the ground using the
supplied screws. Ensure the screws are screwed
all the way down in the countersink. If the charging
station is placed against a wall, it is best to wait
before securing the charging station to the ground
until after all the wires have been connected.
IMPORTANT INFORMATION
It is not permitted to make new holes
in the charging station’s plate. Only the
existing holes may be used to secure the
base plate to the ground.
IMPORTANT INFORMATION
Do not tread or walk on the charging
station’s plate.
min 30cm/12”
3012-1344
3018-220
3018-221
3018-235
1157808,Gardena_R100Li-R130Li,GB_151217.indd 19 2016-01-12 09:16:07