Operation Manual

English - 33
INSTALLATION
4. Check that the robotic lawnmower follows the
guide wire all the way to the charging station and
that it docks with the charging station. The test
is approved only if the robotic lawnmower is able
to follow the guide wire the entire distance to the
charging station and docks at the rst attempt.
If the robotic lawnmower is unable to dock on
the rst attempt, it will automatically try again.
The installation is not approved if the robotic
lawnmower needs two or more attempts to dock
with the charging station. In this case, check that
the charging station, the boundary wire and the
guide wire are installed in accordance with the
instructions.
5. The robotic lawnmower will stay in the charging
station until you press the START button.
The guide system must rst be calibrated if the above test
is to provide a satisfactory result. See 3.8 First start-up
and calibration on page 32.
1157808,Gardena_R100Li-R130Li,GB_151217.indd 33 2016-01-12 09:16:30