Operation Manual
English - 39
CONTROL PANEL
5 Control panel
All forms of commands and settings for the robotic
lawnmower are made via the control panel. All functions
are accessed via a number of menus.
The control panel consists of a display and a keypad. All
information is shown on the display and all input is done
using the buttons.
When the stop button has been pressed and the hatch is
opened, the start page is displayed showing the following
information:
• Operating information, e.g. MOWING, PARKED or
TIMER. If the stop button is pressed when the robotic
lawnmower is running, what it did just before it was
stopped e.g. MOWING or SEARCHING is displayed.
The text READY is displayed if the robotic lawnmower
is not in any specic operating mode, e.g. if the main
switch has just been turned on.
• Date and clock show the current time.
• The ECO symbol is displayed if the robotic
lawnmower is set in ECO mode.
• The black clock symbol (A) indicates when the mower
is not allowed to mow due to a timer setting. If the
mower is not allowed to mow due to SensorControl,
symbol (B) is shown (not applicable for
GARDENA
R100Li,R100LiC)
. If the operation mode Override timer
is chosen, symbol (C) is shown.
• The battery status shows the remaining battery
charge. If the robotic lawnmower is loading, a ash is
also shown over the battery symbol (D). If the robotic
lawnmower is placed in the charging station without
charging, (E) is shown.
• The number of operating hours indicates the number
of hours since the day of manufacture that the robotic
lawnmower has been in operation. The time that the
robotic lawnmower has spent mowing or searching
for the charging station is counted as operating time.
3018-239
3018-306
3018-305
3012-1379
3012-569
D E
1157808,Gardena_R100Li-R130Li,GB_151217.indd 39 2016-01-12 09:16:38